ADT® Authorized Dealer Serving Montgomery, Selma, and The Surrounding Area
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Montgomery Residence

Property owners must defend against a variety of risks like fire, flooding, and burglary. But what about a danger that can’t be discerned by human senses? Carbon monoxide is different from other risks as you may never know it’s there. Nevertheless, installing CO detectors can easily safeguard you and your household. Find out more about this dangerous gas and where to place carbon monoxide detectors in your Montgomery residence.

What Is Carbon Monoxide?

Called the silent killer because of its absence of odor, taste, or color, carbon monoxide is a commonly found gas produced by the incomplete combustion of fuels. Any fuel-consuming appliance like an oven or furnace can produce carbon monoxide. Although you typically won’t have any trouble, difficulties can arise when an appliance is not regularly maintained or appropriately vented. These mistakes could cause a build-up of the potentially lethal gas in your residence. Heating appliances and generators are the most common culprits for CO poisoning.

When in contact with low concentrations of CO, you might experience headaches, dizziness, fatigue nausea, or vomiting. Continuous exposure to high amounts could result in cardiorespiratory failure, and even death.

Suggestions For Where To Place Montgomery Carbon Monoxide Detectors

If you don’t use a carbon monoxide detector in your residence, purchase one today. Ideally, you should use one on each floor of your home, including basements. Review these suggestions on where to place carbon monoxide detectors in Montgomery:

  • Install them on every floor, particularly in places where you utilize fuel-burning appliances, including water heaters, furnaces, gas dryers, and fireplaces.
  • Always have one no more than 10 feet away from bedroom areas. If you only have one CO detector, this is the place for it.
  • Place them approximately 10 to 20 feet away from sources of CO.
  • Do not affix them directly above or beside fuel-burning appliances, as a little carbon monoxide could be emitted when they turn on and trigger a false alarm.
  • Fasten them to walls about five feet off the ground so they will sample air where inhabitants are breathing it.
  • Avoid putting them near windows or doors and in dead-air places.
  • Put one in spaces above garages.

Inspect your CO detectors often and maintain them per manufacturer guidelines. You will usually need to switch them out every five to six years. You should also make sure any fuel-consuming appliances are in in good working condition and sufficiently vented.