Categories

False alarms and system malfunctions can be exasperating, and even worse, might prevent your security system from working how it should. Thankfully, most problems, from false alarms to dead batteries, are simple to remedy. Check out our tips for troubleshooting your home alarm system in Montgomery. We’ll help you keep your family members shielded and your system operating smoothly.

Test Your Home Security System In Montgomery

One of the most effective ways to troubleshoot your property’s security is to test it yourself! The latest systems allow you to put them in test mode to keep you from triggering an emergency call. After switching to test mode, do the following:

• Turn on your system as you typically would when leaving.
• Open a window or door protected by a contact sensor, or test other sensors. Close the door or window once you’re finished so it doesn’t trigger the alarm when you switch the system back on.
• Allow the alarm to go off for 60 seconds to ensure communications with the security provider and to create an entry in the alarm activity log.
• Proceed to test devices as you wish
• Inspect the alarm’s activity log to confirm proper function.

Rest assured, monitoring specialists can tell that your alarm system is involved in a test. Just make sure to switch off test mode when done. It’s a good idea to test once a month or whenever you change your home’s internet or phone connectivity.

Check The Position And Condition Of Motion Sensors

Although an crucial aspect of your alarm system, motion detectors are notorious for false alarms. You can help prevent them with a few straightforward troubleshooting steps.

• Conduct a physical check. Is there something that could move within the path of the sensor, like a window treatment caught in a breeze?
• Is the sensor dirty? Cobwebs, dirt, and grime can cause poor performance. Make sure the sensor is clean.
• Does the motion detector offer pet immunity you can activate? Some sensors can be set to ignore pets weighing as much as 100 pounds.
• When was the battery replaced? A nearly depleted battery may impact performance or result in false alarms.
• Is the sensor aimed toward a source of heat? Excess heat from direct sun or a fireplace can set off an alarm.

Keep Batteries On Hand And Pay Attention To Low Battery Warnings

One helpful perk of the latest home security systems is that they’ll let you know when batteries are getting low. If your system uses a control panel or smartphone app, you’ll typically discover alerts there. Depending on your system, you could detect an occasional beep when batteries are getting low. 

Motion sensors, contact sensors, smoke detectors, and other wireless components have batteries that should be replaced every year or two. It’s a good idea to keep batteries on hand and set a replacement schedule. Many systems also include a backup battery for the primary control panel. This backup battery helps keep your system functioning if you lose power and should recharge once the electricity is working again. If it fails to recharge, you will have to replace it.

Troubleshooting Is Simple With ADT Home Security In Montgomery 

As the foremost name in home security, ADT builds systems that provide superior functionality and convenience. Getting into test mode is straightforward through the ADT+ app or MyADT.com, and you’ll always be sent alerts when a battery is low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system ideal for your Montgomery home and family. Call (334) 219-7426 or complete our form today!